Panasonic SA-PM53E Service Manual page 24

SA-PM53E / SA-PM53EB / SA-PM53EG
Error Code Diagnosis Contents Description of error
F02 TPS abnormal
F15 CD REST
Abnormal
F26 Communication
between CD servo
LSI and micro-p
abnormal.
F28 DISC
Abnormal.
F29 DISC
Abnormal.
F27 SLIDE OPERATION
Abnormal.
F17 DOWN
Abnormal.
F22 LOADING
MOTOR/MECHA
Abnormal.
SW CD traverse position intial
setting operation failsafe
counter (1000 ms) waiting
for REST SW toturn on.
Error No. shall be clear by
force or during cold start.
CD function DTMS
command, after system
setting, If SENSE = ´L´
cannot be detected.
Memory shall contain F26
code. After Power on, CD
function shall continue,
error display shall be "NO
DISC". Error No. shall be
clear by force or cold start.
LOAD While going to play
position, if failsafe counter
is finished and switch o
change or switch target
condition was not achieve,
this error shall be
memorized. Next time
mechanism operates, it
shall do coldstart. Error
No. shall be clear by force
or cold start.
UNLOAD While going to play
position, if failsafe counter
is finished and switch no
changeor switch target
condition was not achieve,
this error shall be
memorized. Next time
mechanism operates, it
shall do coldstart.Error No.
shall be clear by force or
coldstart.
During vertical operation, if
failsafe timer is finished
and switch no change or
switch target condition was
not achieve, this error shall
be memorized. Next time
mechanism operates, it
shall do coldstart.Error No.
shall be clear by force
orcoldstart.
SW During vertical operation
going to the bottom
position, if failsafe timer is
finished and switch no
change or switch target
condition was not achieve,
this error shall be
memorized. The Next time
mechanism operates, it
shall do mechanism
initialization.Error No. shall
be clear by force or
coldstart.
During mecha initialization,
Loading mode mechanism
abnormal, normal
operation cannot be
achieve.The next time
mechanism operates, it
shall do mechanism
initialization.Error No. shall
be clear by fore or
coldstart.
Automatic FL Display
24
Remarks
For deck mechanism unit (For deck 1/2).
Press [ ] on main unit for next
error.
For CD unit (For Traverse).
Press [ ] on main unit for next
error.
For CD unit (For Traverse).
Press [ ] on main unit for next
error.
For CD unit (For Traverse).
Press [ ] on main unit for next
error.
For CD unit (For Traverse).
Press [ ] on main unit for next
error.
For CD unit (For Traverse).
Press [ ] on main unit for next
error.
For CD unit (For Traverse).
Press [ ] on main unit for next
error.
For CD unit (For Traverse).
Press [ ] on main unit for next
error.