Error Code Table - Panasonic SA-PM53E Service Manual

error code.
2. To display all error code memorized
In "CR16 Self Diagnostic mode", press [CD CHECK] to display subsequence error code. It shall repeat after reaching error
no. 5.
3. To clear the error code memory
In "CR16 Self Diagnostic mode", long press [CD CHECK] key (2s or more).
4. To exit CR16 Self Diagnostic mode
Turn off the set.
8.2.

Error Code Table

Self-Diagnosis Function provides information on any problems occuring for the units and its respective parts by displaying error
codes. Thesed error code such as U**, H** and F** are stored in memory and held unless it is cleared.
The error code is display by enter into self-diagnostic mode.
Error Code Diagnosis Contents Description of error
H01 MODE SW abnormal
H02 REC INH SW
abnormal
H03 HALF SW abnormal
F01 Reel pulse abnormal
Automatic FL Display
23
SA-PM53E / SA-PM53EB / SA-PM53EG
Remarks
For deck mechanism unit (For deck 1/2).
Press [ ] on main unit for next
error.
For deck mechanism unit (For deck 2).
Press [ ] on main unit for next
error.
For deck mechanism unit (For deck 1/2).
Press [ ] on main unit for next
error.
For deck mechanism unit (For deck 1/2).
Press [ ] on main unit for next
error.