SA-PM53E / SA-PM53EB / SA-PM53EG
Step 1 : Remove 1 screw.
Step 2 : Release the clutch and remove the Tape Eject P.C.B..
Step 3 : Remove 4 screws.
Step 4 : Push the lever as arrow shown to remove the Deck
Mechanism.
9.7.
Disassembly of Front Panel
· Follow the (Step 1) - (Step 6) of item 9.4.
· Follow the (Step 1) - (Step 2) of item 9.5.
Step 1 : Detach the connector CN401 and CN501.
Step 2 : Remove 1 screw and Chassis ground wire.
Step 3 : Release 2 catches.
Step 4 : Release the catch at the bottom cabinet and remove
the front panel as arrow shown.
9.8.
Disassembly of Panel P.C.B.
· Follow the (Step 1) - (Step 6) of item 9.4.
· Follow the (Step 1) - (Step 2) of item 9.5.
· Follow the (Step 1) - (Step 4) of item 9.7.
30