8.1.7.
RDS Checking
Purpose : To check the RDS Function.
Below is the procedures for this mode.
Step 1: Enter into Doctor mode (For more information refer to section 8.1 on key operation to enter into this mode).
Step 2 : Press [DISPLAY] button on remote control. Enter into RDS checking. (During this mode)
· BASS and TREBLE set to 0dB and preset EQ OFF.
· When [DISPLAY] key is pressed, it will enter the FM band setting.
· The data in test mode 5 shall be memorized.
· For region without RDS is shall be display.
· PS (MODE 1), PTY each shall be displayed for 2 sec each.
21
SA-PM53E / SA-PM53EB / SA-PM53EG