Traulsen RBC200 Owner's Manual page 22

VII. OPERATING THE BLAST CHILL CONTROL - SYSPAR
VII. j - SYSPAR - SETTING THE VARIOUS CONTROL FEATURES:
By accessing SYSPAR (system parameters), the operator can adjust many
control features to better suit their operational needs, such as: Clock Settings,
Probes, Temperature Scale (F or C), Alarm Settings and Chill Parameters. It
also provides for an easy return to the original factory default settings with a
RESET feature.
From the SETUP screen, select SYS PAR to get:
Press to select SYS PAR.
Press to decrease ITEM.
Press to decrease VALUE.
Press to return to MAIN MENU*
*without saving.
1) SET CLOCK
a) MONTH (JANUARY – DECEMBER)
b) DATE (1 – 31
c) YEAR (2003 – 2079)
d) DAY OF WEEK (SUNDAY – SATURDAY)
e) HOUR (0 – 23)
f) MINUTE (0 – 59)
g) DLS TIME (ENABLED – DISABLED)
2) PROBES
a) 1 (ON – OFF) b)
c) 3 (ON – OFF)
3) DISPLAY
a) TEMPERATURES (IN DEG C – IN DEG F)
4) LOGGING
a) TIME (5-MINUTES – 30-MINUTES)
5) ALARM
a) CYCLE RUNNING (NO – yes)
b) CYCLE ENDS (NO – yes)
c) PRINTER ERROR (NO – yes)
d) HIGH/LOW TEMP (no – YES)
e) POWER FAILURE (no – YES)
6) REMINDERS
a) DOOR OPEN (0 – 2 MINUTES)
7) BLAST
a) TARGET (33 – 40)
c) HOLD (10 – 40)
e) LOW ALARM (-30 – 34)
8) SOFT CHILL
a) BY TEMP (5 – 20)
c) 2ND TEMP (10 – 40)
9) FREEZE CHILL
a) TARGET (-22 – 28)
c) HOLD (10 – 40)
e) LOW ALARM (-30 – 0)
10) RESET
a) PARAMETERS (YES – NO)
1 Last day is corrected for month and leap year.
SYS PAR: SET CLOCK
ITEM:MONTH
VALUE:APRIL
CANCEL ENTER
SYS PAR Menu Display
)
1
2 (ON – OFF)
b) AIR (10 – 40)
d) HIGH ALARM (35 – 60)
b) BY TIME (10 – 90)
b) AIR (-32 – 20)
d) HIGH ALARM (20 – 45)
-21-
Press to select SYS PAR.
Press to increase ITEM.
Press to increase VALUE.
Press to return to SETUP with saving.
SYS PAR:
ITEM:MONTH
VALUE:APRIL
CANCEL
SYS PAR:
ITEM:DATE
VALUE:04/XX/00
CANCEL
SYS PAR:
ITEM:YEAR
VALUE:04/14/XX
CANCEL
SYS PAR:
ITEM:HOUR
VALUE:XX:00
CANCEL
SYS PAR:
ITEM:MINUTE
VALUE:10:XX
CANCEL
SET CLOCK
ENTER
SET CLOCK
ENTER
SET CLOCK
ENTER
SET CLOCK
ENTER
SET CLOCK
ENTER