Traulsen RBC200 Owner's Manual page 21

Blast chiller refrigerators
Hide thumbs Also See for RBC200:
Table of Contents

Advertisement

VII. OPERATING THE BLAST CHILL CONTROL - SYSPAR
VII. i - ACCESSING SYS PAR SETTING LEVEL:
SYS PAR represents the supervisor level of access to the SmartChill
allowing on-site adjustment to the factory preset operating parameters.
To enter the SYSPAR access level please follow the below procedure.
STEP ONE:
From the MAIN MENU, select MORE by pressing the button to
the right of where this is shown on the display. The menu
shown will then change to display additional menu options.
STEP TWO:
Press the button to the right of where SETUP is shown on the
display. Note when you first enter SETUP, only Preset Supervisor
is available (as delivered, only the factory preset supervisor's
PIN access or ID is set-up).
Press the buttons to the left and right of where PASSWORD is
shown on the display to scroll to the factory preset PIN of
"57." Press the button to the right of where ENTER appears on
the control to enter this PIN number. The SETUP display menu
is displayed.
If users have already been setup, select the supervisor's name
NOTE:
using the UP or DOWN keys. On the next line, use the UP or
DOWN keys to enter their Password (or Personal Identification
Number). Press the button to the right of where ENTER appears
on the control to enter this selection. The SETUP display menu
is displayed.
STEP THREE: From the SETUP display menu , select the button to the right of
where SYS PAR is shown on the display. Refer to the diagram
on page 21 in order to access the various Sys Par settings
®
controller,
-20-
MAIN MENU
AIR 35
BY TEMP
BY PROD
BY TIME
08:05:01
MORE
MAIN MENU
08:06:01
HOLD PROD
PRINT
DEFROST
SETUP
BACK
SELECT
SUPERVISOR:
↓ ↓ ↓ ↓ ↓ PRESET
SUPERVISOR↑ ↑ ↑ ↑ ↑
↓ ↓ ↓ ↓ ↓ PASSWORD (PIN): 00↑ ↑ ↑ ↑ ↑
CANCEL
ENTER
SELECT
SUPERVISOR:
↓ ↓ ↓ ↓ ↓ PRESET
SUPERVISOR↑ ↑ ↑ ↑ ↑
↓ ↓ ↓ ↓ ↓ PASSWORD (PIN): 57↑ ↑ ↑ ↑ ↑
CANCEL
ENTER
MAIN MENU
08:06:01
HOLD PROD
PRINT
DEFROST
SETUP
BACK
SETUP
09:04:11
PRODUCTS
SYS PAR
USERS
MAIN MENU
SYS PAR:
SET CLOCK
ITEM:
MONTH
VALUE:APRIL
CANCEL
ENTER
SYS PAR Menu Display
°
F

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rbc200rtRbc400Rbc400rtRbc50Rbc100

Table of Contents