Mx2008 Ac Power Supply Module Description | 63 - Juniper MX2008 Hardware Manual

Table 22: MX2008 AC Power Supply Module LEDs
Label Color
PWR OK Green
Yellow
—
FAULT Red
—
INP0 Green
Yellow
—
INP1 Green
Yellow
—
SEE ALSO
MX2008 Component LEDs on the Craft Interface | 47

MX2008 AC Power Supply Module Description | 63

MX2008 AC Power System Electrical Specifications | 85
State Description
On Power is functioning normally with no alarms.
On PSM controller is off with both INP0 and INP1 voltage out of range.
Off PSM is not functioning normally or the AC input voltage is out of range.
On PSM is not functioning normally or the AC input voltage is out of range.
Off PSM is functioning normally.
On AC input is within the required voltage range and the DIP switch is set to
on.
On AC input is out of the required voltage range.
Off AC input to the PSM is not present.
On AC input is within the required voltage range and the DIP switch is set to
on.
On AC input is out of the required voltage range.
Off AC input to the PSM is not present.
66