Mx2008 Ac Power Electrical Safety Guidelines - Juniper MX2008 Hardware Manual

Table 30: Electrical Specifications for AC Power Supply Input Fuses (continued)
Electrical Characteristic
Melting Integral
INP0/INP1 Neutral Fuse
Ampere Rating
Voltage Rating
Interrupting Rating
Nominal Cold Resistance
Melting Integral
SEE ALSO
Replacing an MX2008 AC Power Supply Module | 422
MX2008 AC Power Requirements | 74
Preventing Electrostatic Discharge Damage to an MX2008 Router | 544

MX2008 AC Power Electrical Safety Guidelines

NOTE: The MX2008, MX2010, and MX2020 routers support the same power modules (AC/DC
PSMs and AC/DC PDMs).
NOTE: For devices with AC power supplies, an external surge protective device (SPD) must be
used at the AC power source.
Value
631 A² sec
Littelfuse 0325020.MXD65LP
20A
250V
1500A @ 250V
4.2 mOhm
2500 A² sec
87