Optional Input/Output Cards - Parker Compax3S Series Installation Manual

Compax3 device description
3.5.5.

Optional input/output cards

Input wiring of digital inputs
SPS/PLC
24VDC 24VDC
X22/11
X22/6
10nF
X22/15
The outputs are short circuit proof; a short circuit generates an error.
36
In this chapter you can read about:
Digital input/output option M12 (I12) ................................................................................ 36
M21 analog input option .................................................................................................. 37
Options M10, M11, M12 and M21 can only be used alternatively.
With Compax3 technology functions T20 and T70, option M21 is always integrated.
3.5.5.1 Digital input/output option M12 (I12)
Option M12 (or M10: with HEDA) offers 8 digital 24V inputs and 4 digital outputs on
X22.
Assignment of the X22 connector
Pin Input/Output
X22/
1 n.c.
2 O0/I0
3 O1/I1
4 O2/I2
5 O3/I3
6 O4/I4
7 O5/I5
8 O6/I6
9 O7/I7
10 O8/I8
11 I
12 O9/I9
13 O10/I10
14 O11/I11
15 I
* Configurable as input or output in the wizard window "I/O assignment" in groups of 4.
All inputs and outputs do have 24 V level.
Maximum load on an output: 100mA
Maximum capacitive load: 50nF (max. 4 Compax3 inputs)
Caution! The 24 VDC power supply (X22/11) must be supplied from an
external source and must be protected by a 1.2 A delayed fuse!
Connections of digital inputs and outputs M10 & M12
Compax3
100KΩ
22KΩ
22KΩ
22KΩ 10KΩ
F1
F1: Quick action electronic fuse; can be reset by switching the 24VDC supply off and
on again.
192-120102 N19 June 2014
I/O /X22
High density/Sub D
factory use
Output 0 / Input 0 - adjustable
Output 1 / Input 1 - adjustable
Output 2 / Input 2 - adjustable
Output 3 / Input 3 - adjustable
Output 4 / Input 4 - adjustable
Output 5 / Input 5 - adjustable
Output 6 / Input 6 - adjustable
Output 7 / Input 7 - adjustable
Output 8 / Input 8 - adjustable
24 VDC power supply
Output 9 / Input 9 - adjustable
Output 10 / Input 10 - adjustable
Output 11 / Input 11 - adjustable
GND24V
Output wiring of digital outputs
Compax3
X22/11
X12/2
22KΩ
F1
Single axis devices
Configurable in the C3
ServoManager *:
*
*
*
(not 24VDC)
SPS/
24VDC
PLC
X22/15