Toshiba FIERY GA-1121 Management Manual page 78

3
3-16 Using Command WorkStation or Command WorkStation LE
Command WorkStation LE
The user Instructions and Notes fields also appear in the Job Properties dialog box.
• Instructions fields are intended to be viewed and annotated by the operator, but
their contents are associated with the job and are deleted when the job is deleted
after printing.
• Notes fields can be viewed but not changed by the operator; their contents are
transcribed to the Job Log just as the user sent them.
Some print options available in the printer driver are not displayed in the Job
N :
OTE
Properties dialog box. For information about specific print options and settings, and
where you set them, see Appendix A of the
3. To override a setting, expand the blue bar for a print setting category. In Command
WorkStation, specify the desired setting. In Command WorkStation LE, click the
current setting in the right column to display a menu of available settings, and choose
the desired setting.
In Command WorkStation, to override a setting for multiple jobs at once, Ctrl-click
the setting name, and choose the desired setting.
To retain a copy of the job with its original settings, duplicate the job and
N :
OTE
rename the duplicate before you change any settings.
Printing Guide.