Table of Contents
Advertisement
6
6-11 Imposition settings
Apply To
In Fixed Page mode, the scaling settings you specify are applied to all pages in a job.
In Mixed Page mode, you can apply scaling to specific slots on sheets. The number of
slots on a sheet depends on the Rows and Columns values. The slot size is determined
by dividing the maximum imageable area of the sheet by the number of slots.
—Applies scaling to the currently selected page.
Current Slot
Row on All Surfaces
same row as the currently selected page.
Columns on All Surfaces
the same column as the currently selected page.
All Slots on All Surfaces
Scale Mode
Choose a scaling option from the Scale Mode menu:
—Scales page(s) to best fill the slot without printing past its edge. Scale to
Scale to Fit
fit is the default mode.
—Enables the Scale Factor and Finished Height and Width fields, so that you
Custom
can specify new scaling values. The original height and width values are displayed for
your reference. When you specify a value, DocBuilder Pro automatically updates the
other fields to preserve the height-to-width aspect ratio of the page.
—Applies scaling to all pages on all sheets that are located in the
—Applies scaling to all pages on all sheets that are located in
—Applies scaling to all pages in the job.
Advertisement
Table of Contents
