Toshiba FIERY GA-1121 Management Manual page 74

3
3-12 Using Command WorkStation or Command WorkStation LE
T C
O IMPORT A JOB INTO OMMAND
1. Choose Import from the File menu, and then choose Job or Archived Job.
2. Locate and select the job file to import and click Open.
3. If the Import Options dialog box appears, specify the desired destination queue, and
then click OK.
You can control the display of the Import Options dialog box by specifying the
"Always show this dialog" option or setting the Show Import Options Dialog
preference (see
A destination queue is available only if the administrator enabled it in Setup (see the
Configuration
W S LE†
ORK TATION
page 2-30).
Guide).