Toshiba PORTEGE M400 Maintenance Manual page 317

4.30 Hinge assembly
4. Peel off four acetate tapes and remove the wireless LAN antennas and Bluetooth
antenna.
5. Remove the following screw and hinge assembly by lifting it up.
• M2.5×6.0B
Bluetooth antenna
Wireless LAN antenna
Installing the Hinge assembly
The following describes the procedure for installing the hinge assembly. (See Figure 4-51
and 4-52.)
1. Seat the hinge assembly in place and secure it with the following screw.
• M2.5×6.0B
2. Stick the wireless LAN antennas and Bluetooth antenna and arrange the wireless
LAN antenna cables and Bluetooth antenna cable in place.
3. Install the antenna cover S and antenna cover T to the slot.
4. Secure the antenna cover S with the following screw.
• M2.0×6.0S
5. Install the LCD harness earth spring and secure the hinge assembly and LCD
harness earth spring with the following screws.
• M2.5×6.0B
6. Install the Harness holder and secure with the following screw.
• M2.5×6.0B
PORTEGE M400 Maintenance Manual (960-541)
FLAT HEAD screw
Acetate tape
Acetate tape
Figure 4-52 Removing the hinge assembly (2)
FLAT HEAD screw
S-THIN HEAD screw
FLAT HEAD screw
FLAT HEAD screw
4 Replacement Procedures
×1
×1
×1
×1
×1
[CONFIDENTIAL] 4-79