Toshiba PORTEGE M400 Maintenance Manual page 311

4.26 Digitizer
Removing the Digitizer
The following describes the procedure for removing the digitizer. (See Figure 4-47.)
1. Remove the following screws securing the digitizer.
• M2.0×4.0B
2. Peel off two glass tapes.
3. Slide out the digitizer toward the arrow pointing.
Glass tape
PORTEGE M400 Maintenance Manual (960-541)
BIND screw
Digitizer
Figure 4-47 Removing the digitizer
4 Replacement Procedures
×2
M2.0x4.0B BIND
M2.0x4.0B BIND
[CONFIDENTIAL] 4-73