Toshiba PORTEGE M400 Maintenance Manual page 266

4 Replacement Procedures
Installing the Bluetooth module
To install the Bluetooth module, follow the steps below. (See Figure 4-16.)
1. Connect the Bluetooth cable to the connector on the Bluetooth module.
2. Connect the Bluetooth cable to the connector CN4400 on the system board and set
the Bluetooth module to the slot in place.
3. Connect the Bluetooth antenna cable to the connector on the Bluetooth module.
4. Stick the spacer in place referring Figure 4-16.
5. Stick the glass tape.
4-28 [CONFIDENTIAL] PORTEGE M400 Maintenance Manual (960-541)
4.9 Bluetooth module