Toshiba PORTEGE M400 Maintenance Manual page 256

4 Replacement Procedures
2. Remove the following screws, connector cover and connector from the optical drive
assembly.
• M2.0×6.0S
3. Remove the following screw and connector base from the optical drive assembly.
• M2.0×3.0S
4. Remove the following screws and ODD side assembly from the optical drive
assembly
• M2.0×6.0S
• M2.0×22.0S
M2.0×22.0S BIND
M2.0×3.0S S-THIN HEAD
M2.0×6.0S BIND
ODD side assembly
4-18 [CONFIDENTIAL]
BIND screw
S-THIN HEAD screw
BIND screw
BIND screw
Connector cover
Figure 4-9 Detaching the optical drive assembly
4.6 Slim select bay module
×2
×1
×1
×1
Connector base
Connector
PORTEGE M400 Maintenance Manual (960-541)
M2.0×6.0S BIND
M2.0×6.0S BIND