Toshiba PORTEGE M400 Maintenance Manual page 133

3.3 Check of the RAID configuration
FAIL for one drive is displayed
One drive in the "RAID-1"is failed and degraded. This may look like failure by
wrong operation. Specify the reason by using Independent Utility.
TOSHIBA RAID / RAID Information Display
Copyright(c) 2005 TOSHIBA CORPORATION. All Rights Reserved.
Level
LD0 RAID-1
Write cache
Degrade Bootup
MBR Protection
S.M.A.R.T
Port Assign Status Size Model
0 LD0-0 ONLINE xxGB FUJITSU-----------------
1 LD0-1 FAILED xxGB FUJITSU-----------------
< RAID: not OPTIMAL >
PORTEGE M400 Maintenance Manual (960-541)
Status Capacity
DEGRADE xxGB
: Enable
: Yes
: Disable
: Enable
3 Tests and Diagnostics
Rev xx.xx.xxxx
[CONFIDENTIAL]
Rev
xxxxxxx
xxxxxxx
3-15