4.3 PC card/Bridge media
4.3.2 Bridge media
Removing the Bridge media (SD Card/Memory Stick (Pro)/xD Picture Card)
The following describes the procedure for removing the Bridge media. (See Figure 4-3.)
CAUTION: Insert or remove the Bridge media in accordance with any instructions in the
Bridge media manual or the manuals of the computer system you are using.
1. Push the Bridge media. It will pop out partly, so pull out the card. (For an instance,
SD card is described in the figure 4-3.)
Installing the Bridge media
The following describes the procedure for installing the Bridge media. (See Figure 4-3.)
1. Insert the Bridge media and press it until it securely connected.
PORTEGE M400 Maintenance Manual (960-541)
Figure 4-3 Removing the Bridge media
4 Replacement Procedures
Bridge media
(SD card)
[CONFIDENTIAL]
4-11