4 Replacement Procedures
4.22 Sensor board
Removing the Sensor board
The following describes the procedure for removing the sensor board. (See Figure 4-39.)
1. Remove the sensor board from the slot.
2. Disconnect the sensor cable from the connector on the sensor board.
Installing the Sensor board
The following describes the procedure for installing the sensor board. (See Figure 4-39.)
1. Connect the sensor cable to the connector on the sensor board.
2. Install the sensor board to the slot.
4-58
[CONFIDENTIAL]
Sensor board
Figure 4-39 Removing the sensor board
Sensor cable
PORTEGE M400 Maintenance Manual (960-541)
4.22 Sensor board