Fl Inverter/Lcd Unit - Toshiba Portege R200 Maintenance Manual

4.24 FL inverter/LCD unit

4.24 FL inverter/LCD unit

Removing the FL inverter/LCD unit
To remove the FL inverter/LCD unit, follow the steps below and refer to Figure 4-31 and 4-
32.
1. Remove the following screw fixing the FL inverter.
•
2. Peel the insulator and disconnect the two cables from the both sides of the connector
on the FL inverter.
3. Remove the FL inverter.
Insulator
PORTEGE R200 Maintenance Manual (960-519)
M2×3C S-FLAT HEAD screw
Figure 4-31 Removing the FL inverter
4 Replacement Procedures
x1
M2×3C S-FLAT HEAD
FL inverter
[CONFIDENTIAL] 4-45