Switch Board - Toshiba Portege R200 Maintenance Manual

4.7 Switch board

4.7

Switch board

Removing the Switch board
To remove the switch board, follow the steps below and refer to Figure 4-10.
1. Turn over the computer and remove the following screw.
•
2. Turn the computer face up and open the display.
3. Remove the switch cover.
4. Disconnect the switch cable from the connector CN3270 on the system board.
5. Remove the following screw and the switch board.
• M2×2.5C S-FLAT HEAD screw
M2×8S BIND
PORTEGE R200 Maintenance Manual (960-519)
M2×8S BIND screw
Figure 4-10 Removing the switch board
4 Replacement Procedures
x1
x1
Switch cover
M2×2.5C S-FLAT HEAD
Switch board
CN3270
Switch cable
[CONFIDENTIAL] 4-19