4.25 Hinge
Installing the hinge
To install the hinge, follow the steps below and refer to Figure 4-33 to 4-35.
1. Install the both sides' hinges and secure them with the following screws.
•
•
2. Pass the LCD cable through the hole and set it in place.
3. Install the palm rest and secure it with the following screws (back).
•
4. Install the both sides' hinge caps and secure them with the following screws (back).
•
PORTEGE R200 Maintenance Manual (960-519)
M3×3S
BIND screw
M2×4B
S-FLAT HEAD screw
M2.5×4B FLAT HEAD screw
M2×3C
S-FLAT HEAD screw
4 Replacement Procedures
x2
x2
x4
x2
[CONFIDENTIAL]
4-51