Lcd Unit / Fl Inverter - Toshiba Satellite U400 Maintenance Manual

Replacement Procedures

4.15 LCD unit / FL inverter

CAUTION: When replacing a LCD, it is required that SVP parameter is set. Update with
Removing the LCD unit / FL inverter
The following describes the procedure of removing the LCD unit and FL inverter
Remove Screw rubber cover
1. Remove the following screws securing the display mask
2. Insert your finger between the edge of the display mask and the LCD, and remove the
display mask while releasing the latches of display mask.
3. Pull out one insulator and peel off the other one adhered to the FL inverter.
Satellite U400/Satellite Pro U400/PORTEGE M800 Maintenance Manual
Downloaded from LpManual.com Manuals
the latest EC/KBC as described in Appendix H "EC/KBC Rewrite
Procedures".
M2.5×5.0 BIND screw X11
Figure 4-28 Remove the display mask
45