Toshiba Portege R200 Maintenance Manual page 256

4 Replacement Procedures
M2×3C S-FLAT HEAD
System board
Audio cover
Installing the system board
To install the system board, follow the steps below and refer to Figure 4-27.
1. Install the audio cover.
2. Install the system board and secure it with the following screws.
•
3. Connect the LED cable to the connector CN3260 on the system board (front).
4. Connect the LCD cable and FL cable to the connectors CN5600 and CN5601 on the
system board.
4-40 [CONFIDENTIAL]
LED cable
Figure 4-27 Removing the system board
M2×3C S-FLAT HEAD screw
LCD cable
FL cable
x2
PORTEGE R200 Maintenance Manual (960-519)
4.20 System board