SFP+ port LED
Each SFP+ port has a status LED to show port operating status and activities.
Table 33 SFP+ port LED description
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow (3 Hz)
Off
SFP port LED
Table 34 SFP port LED description
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow (3 Hz)
Off
Management Ethernet port LEDs
The switch provides two status LEDs LINK and ACT for the copper management Ethernet port and
one double-color LED LINK/ACT for the fiber management Ethernet port.
Table 35 Copper management Ethernet port LED description
LED mark
LINK
ACT
Description
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 1 Gbps.
The port is sending or receiving data at 1 Gbps.
No transceiver module or cable has been installed or no link is present on the port.
Description
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 1 Gbps.
The port is sending or receiving data at 1 Gbps.
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 100 Mbps.
The port is sending or receiving data at 100 Mbps.
No transceiver module or cable has been installed or no link is present on the port.
Status
Description
Off
No link is present on the port
Steady green
The port is operating at 10/100/1000 Mbps.
Off
The port is not receiving or sending data.
Flashing yellow
The port is sending or receiving data.
59