Connecting The Power Cords; Connecting An Ac Power Cord; Connecting A Dc Power Cord - H3C S6820 Series Installation Manual

Connecting the power cords

WARNING!
Provide a circuit breaker for each power input. When you connect a power cord, make sure the
circuit breaker is switched off.

Connecting an AC power cord

Insert the female connector of the AC power cord supplied with the power module into the
1.
power receptacle on the power module.
Use a cable tie to secure the power cord to the handle of the power module, as shown in
2.
38.
Connect the other end of the power cord to an AC power outlet.
3.
Figure 38 Connecting an AC power cord to the LSVM1AC650 power module
(1) Cable tie
(2) Tighten the cable tie to secure the power cord to the handle of the power module

Connecting a DC power cord

Align the power cord plug with the power receptacle on the power module, and insert the plug
1.
into the receptacle (see
The plug and receptacle are foolproof. If you cannot insert the plug into the receptacle, re-orient
the plug rather than use excessive force to push it in.
Use a cable tie to secure the power cord to the handle of the power module, as shown in
2.
38.
Connect the other end of the power cord to the DC power source.
3.
Figure 39).
24
Figure
Figure