Qsfp+ Port; Sfp28 Port - H3C S6820 Series Installation Manual

Table 25 QSFP+ fiber cables available for the QSFP+ and QSFP28 ports
QSFP+ fiber cable
QSFP-40G-D-AOC-7M
QSFP-40G-D-AOC-10M
QSFP-40G-D-AOC-20M
Table 26 QSFP+ to SFP+ copper cables available for the QSFP+ and QSFP28 ports
QSFP+ to SFP+ copper cable
LSWM1QSTK3
LSWM1QSTK4
LSWM1QSTK5
NOTE:
• You can use a QSFP-40G-SR4-MM850 or QSFP-40G-CSR4-MM850 transceiver module to
connect a QSFP+ port to four SFP+ ports. The QSFP+ transceiver module and SFP+ transceiver
modules to be connected must be the same in specifications, including central wavelength and
fiber type.
• Only F6207 and later versions support the QSFP-100G-ER4L-WDM1300 modules.
• Only F6206 and later versions support the QSFP-100G-SWDM4-MM850 modules.
• MPO connectors include physical contact (PC) connectors with a flat-polished face and
angle-polished contact (APC) connectors with an angle-polished face (8°).

QSFP+ port

The LSWM116Q provides 16 QSFP+ ports, the LSWM18QC provides 8 QSFP+ ports, and
LSWM124XG2Q, LSWM124XG2QFC, LSWM124XG2QL, and LSWM124XGT2Q each provide 2
QSFP+ ports. You can install the following QSFP+ modules and cables in the QSFP+ ports:
•
QSFP+ transceiver modules in
•
QSFP+ copper cables in
•
QSFP+ fiber cables in
•
QSFP+ to SFP+ copper cables in
The QSFP+ ports on the LSWM116Q interface card cannot be split into four SFP+ ports.

SFP28 port

The S6820-56HF switch provides 48 SFP28 ports. The LSWM124TG2H provides 24 SFP28 ports.
The SFP28 ports support the following transceiver modules and cables:
•
SFP28 transceiver modules in
•
25-GE SFP28 copper cables in
•
25-GE SFP fiber cables in
•
10-GE SFP+ transceiver modules in
•
10-GE SFP+ copper cables in
•
10-GE SFP+ fiber cables in
Table 23.
Table 24.
Table 25.
Table 26.
Table 27.
Table 28.
Table 29.
Table 15.
Table 16.
Table 17.
56
Cable length
7 m (22.97 ft)
10 m (32.81 ft)
20 m (65.62 ft)
Max transmission distance
1 m (3.28 ft)
3 m (9.84 ft)
5 m (16.40 ft)