Table of Contents
Advertisement
13. Put on PPE (Personal Protective Equipment).
PERSONAL PROTECTIVE
EQUIPMENT (PPE)
The Model G0767 produces a large amount
of sparks that can cause burns and injuries
to skin, eyes, and face. ALWAYS wear safety
goggles, face shield, dust mask, heavy
leather, long sleeve gloves, and leather
apron to reduce the risk of injury from flying
sparks when operating. Also, wear leather
boots with toe protection to reduce risk of
injury from a falling tube.
14. Turn machine ON and wait until abrasive belt
reaches full speed.
15. Stand to side of machine to avoid path of
sparks during next step.
-26-
16. Use feed lever (see Figure 32) to bring tube
in light contact with abrasive belt as you use
rotate traverse crank to move tube across
abrasive belt.
Note: Moving tube back and forth across
abrasive belt reduces wear in any one spot
and increases life of belt.
Figure 32. Feed and traverse controls.
17. When notch is complete, use feed lever to
move tube away from abrasive belt (see
Figure 33 for an example).
Figure 33. Example of notch in end of tubing.
18. Turn machine OFF and wait for abrasive belt
to completely stop.
19. Loosen clamp lever and remove tube.
Model G0767 (Mfd. Since 1/14)
Feed
Lever
Traverse
Crank
Advertisement
Table of Contents
