Dc Power Connections - Avaya Virtual Services Platform 7000 Series Installation Manual

Installation preparation
Danger:
Use only power cords with a grounding path. Without a proper ground, a person who touches
the switch is in danger of receiving an electrical shock. A switch without a proper grounding
path can result in excessive emissions
Procedure
1. Plug the female end of the AC power cord into the back of the switch power
2. Plug the male end of the AC power cord into a suitable AC power outlet.

DC power connections

To connect your switch to DC power you require DC power cables and ground cables that
meet the requirements of your local electrical code. Avaya does not supply the cables for
connecting the DC power supply to the DC power source. Select cables that comply with the
electrical code of the country where you use the DC power supply.
DC power supply connections
Caution:
Risk of equipment damage
Make sure that the connection cables used with the DC power supply are appropriate for
use with your DC power source. Consider gauge, flammability, and mechanical serviceability
when determining the type of cables to use.
24 VSP 7000 installation
supply.
Important:
The switch will power on immediately once connected to a suitable AC power
source. The switch does not have a power switch.
Caution:
Ensure you only use an appropriately rated AC power cord. Do not use an
extension cord.
Warning:
The only way to turn off the switch is to disconnect the power. Always connect the
AC power cord in a location that can be reached quickly and safely in case of an
emergency.
Comments? infodev@avaya.com
July 2013