Avaya Virtual Services Platform 7000 Series Installation Manual page 22

Installation preparation
Risk of injury from electric shock
Before working on this equipment, be aware of proper safety practices and hazards involved
with electrical circuits. Use only power cords that have a grounding path. Ensure the switch is
properly grounded before connecting a power source.
Note:
VSP 7000 series switches do not have a power switch. When you connect the AC power
cord to a suitable AC power outlet, the switch powers up immediately. Ensure that you
connect the AC power cord to the back of the switch, and then connect the cord to a power
outlet. You must use the correct power cord for the switch and power supply.
Country and plug
description
Continental Europe
• CEE7 standard VII male
plug
• Harmonized cord (HAR
marking on the outside of
the cord jacket to comply
with the CENELEC
Harmonized Document
HD-21)
U.S./Canada/Japan
• NEMA5–15P male plug
• UL-recognized (UL
stamped on cord jacket)
• CSA-certified (CSA label
secured to the cord)
United Kingdom
• BS1363 male plug with
fuse
• Harmonized cord
22 VSP 7000 installation
Specifications
220 or 230 VAC
50 Hz
Single phase
100 or 120 VAC
50/60 Hz
Single phase
240 VAC
50 Hz
Single Phase
Comments? infodev@avaya.com
Typical plug
July 2013