Unpacking; Uncrating - 3M -Matic 200a Instructions And Parts List

6-UNPACKING

6.1 Uncrating

The envelope attached to the shipping box contains
the uncrating instructions of the machine (Figure 6-1).
Cut straps. Cut out staple positions along the
bottom of the shipping box (or remove staples
with an appropriate tool - Figure 6-2)
After cutting out or removing the staples,
lift the shipping box in order to clear the machine
(two persons required).
Transport the machine with a fork-lift truck to
the operating position. Lift the pallet at the
point indicated in Figure 6-3.
(weight of machine + pallet = See Specifications).
200a-NA
Figure 6-1
Figure 6-2
Figure 6-3
Removal of Pallet
Using a 10mm combination wrench, remove the
fasteners that secure the case sealer legs to pallet
at each leg (as shown in Figure 6-4).
Figure 6-4
A package is located under the machine body.
Retrieve the instruction manual for additional
procedures of the set up. The package also
contains parts removed for shipping, spare parts
and tools (Figure 6-5).
Figure 6-5
6.2 Disposal of Packaging Materials
The 200a package is composed of:
- Wooden pallet
- Cardboard shipping box
- Wooden supports
- Metal fi xing brackets
- PU foam protection
- PP plastic straps
- Dehydrating salts in bag
- Special bag of laminated polyester/aluminium/
Polyethylene (sea freight package only)
- Polyethylene protective material
For the disposal of the above materials, please follow
the environmental directives or the law in your country.
16
2011 June