Unpacking; Uncrating; Packaging Materials Disposal - 3M -Matic 7000a-I Instructions And Parts List

6. Unpacking

6.1 Uncrating

The envelope attached to shipping
box contains the uncrating instruc-
tions of the machine (Figure 6-1).
Cut straps. Cut out staple positions
along the bottom of the shipping box
(or remove staples with an appro-
priate tool - Figure 6-2). After cut-
ting out or removing the staples,
lift the shipping box in order to clear
the machine (two persons required).
Transport the machine with a fork-
lift truck to the operating position.
Lift the pallet at the point indicated
in Figure 6-3 (weight of machine +
pallet = See Specifications).
Removal of Pallet
Loosen and remove nuts and brackets
using the open end spanner supplied
in the tool box (Figure 6-4).
A cardboard box is located under
the machine body. Retrieve instruc-
tion manual for additional set-up
procedures. The box also contains
parts removed for shipping, spare
parts and tools (Figure 6-5).
6.2 Disposal of Packaging Materials
The 7000a-I / 7000a3-I Pro package is
composed of:
- Wooden pallet
- Cardboard shipping box
- Wooden supports
- Metal fixing brackets
- PU foam protection
- PP plastic straps
- Dehydrating salts in bag
- Special bag of laminated polyester/
aluminium/Polyethylene
(sea freight package only)
- Polyethylene protective material
For the disposal of the above
materials, please follow the
environmental directives or the law
in your country.
3M-Matic 7000a-I / 7000a3-I Pro - Type 11700
™
Page 18
44-0009-2164-1 / ECO# 0078045
Fasteners
Figure 6-4
Figure 6-5
Original Instruction
Source Document for all related Manuals/Translations
Figure 6-1
Figure 6-2
Figure 6-3
International - ENG
February 2021