Sample; Sample Lane; Sample Lane Step - Korg wavestate Owner's Manual

Wave sequencing synthesizer

Hide thumbs Also See for wavestate:

Table of Contents

Wave Sequencing 2.0

Sample

This Lane sets the sample played by each Step.

Preset, Start, End, Loop Start, Loop End, Repeats

See "Front-Panel Lane Controls" on page 21.

Pitch Lane

[Only Affects Pitch, Affects Sample Map]

Multisamples typically include many different samples, mapped across the keyboard. When you transpose the

OCTAVE

keyboard using the

buttons, for instance, it's not just the pitch that changes; different samples will be

selected as well. Sometimes, you may want the Pitch Lane to affect sample choice, as if you were transposing the

keyboard; other times, you may want it to only change the pitch, without affecting the sample choice. This parameter

lets you choose between the two options.

Only Affects Pitch: The Pitch Lane only affects the played pitch; it will not change the sample chosen by a given key.

Affects Sample Map: The Pitch Lane will act similar to transposing the keyboard, and may select different samples

according to the selected Multisample.

Step

See "Step" on page 23.

Chan (Channel)

[Stereo, Left, Right, n/a]

This applies to stereo Multisamples only; for mono Multisamples, "n/a" is shown. You can choose whether to use the

original Stereo signal, or only the Left or Right channels (in mono).

MS (Multisample)

[List of Multisamples]

VALUE

ENTER

Select this parameter and then either move

or press

to bring up the Multisample Select popup.

Oct (Octave)

[-2...+2]

This transposes the Multisample up or down by up to two octaves.

Table of Contents