Timing; Timing Lane - Korg wavestate Owner's Manual

Wave Sequencing 2.0

Timing

This Lane controls the duration and crossfade of each Step, creating rhythms or smooth, evolving sounds.

Timing Lane

Tempo Off
Tempo On
Preset, Start, End, Loop Start, Loop End, Repeats
See "Front-Panel Lane Controls" on page 21.
TEMPO (SHIFT-TIMING)
[Off, On]
Durations can use either time
Speed
[TEMPO Off: 0.01...100.00]
[TEMPO On: 1/4...4x]
This modifies the speed of the entire Timing Lane. When
100 of the original speed) to 100.00 (100 times the original speed). Try modulating this from the
an envelope!
When TEMPO is On, you can select tempo-locked ratios from 1/4 to 4x of the original Speed.
Xfade
[Time, Tempo, Off]
This determines how all of the Step Xfade parameters will work.
Time: Crossfades times are set in seconds.
Tempo: Crossfades times are set in rhythmic values.
Off: All transitions will be abrupt, and none of the Xfade-related parameters will apply.
Swing (Resolution)
[32nd-note triplet...quarter-note]
(Swing Amount)
[-300...+300%]
Swing adjusts the timing of up-beats relative to the Swing Resolution. For instance, if Resolution is set to 1/8, Swing
affects every other 8th note.
+100%: Full "swing." Up-beats become triplets, moving one third of the way toward the next down-beat.
+300%: Up-beats move all the way to the next down-beat.
(TEMPO Off) or rhythmic values (TEMPO On).
TEMPO is Off, you can vary this continually from 0.01 (1/
22
SPEED knob, or from