Name; Editing Names; Compare; Using Compare - Korg wavestate Owner's Manual

Write

Name

Note: you can name Programs, Wave Sequences, and Lanes without writing them separately. As long as you save the
enclosing Performance, the new name will be saved.

Editing names

1. On the Write page, select the Name.
2. Press ENTER, or turn the
The Name page appears.
3. Use the cursor buttons to move back and forth in the text, and use
shown below.
Names can be up to 24 characters long.
4. Press SHIFT to toggle between A-Z, a-z, numbers, and symbols.
5. Hold SHIFT and press
6. Hold SHIFT and press
7. When you've finished entering text, press

Compare

Select
[Saved Performance, Edited Performance]
Saved Performance: The saved version of the Performance will be heard.
Edited Performance: The edited version of the Performance will be heard. If the Performance has not been edited, this
is not available.

Using Compare

To use compare:
1. Hold ENTER and press WRITE.
The Compare page will appear.
2. Hold ENTER and press WRITE, again, to toggle between the saved and edited versions of the Performance.
When you change from Edited Performance to Saved Performance, the edited version is stored in a buffer, and the
Performance reverts to the version saved in the database. You can toggle back and forth between the two as many times
as you like.
If you change to Saved Performance and then make any edits, the next time you go to the Compare page Select will
be set to Edited Performance, and the previously buffered "Edited Performance" will be lost.
VALUE dial.
> (PAGE+) to insert a space.
< (PAGE-) to delete the previous character.
ENTER
VALUE
to return to the previous page, or
15
to select a character from the set
SHIFT-ENTER to cancel.