Table of Contents
Advertisement
Utility
•
MIDI received by any Layer with Use Global MIDI Channel enabled
•
MIDI CCs received by and sent from the Program Mod Knobs, for any Layer with Use Global MIDI Channel
enabled
•
Program Change (via Set Lists)
•
Other global functionality, such as modulation of Master Reverb, System Exclusive, and Arpeggiator
Local Control
[Off, On]
On: This is the default; the wavestate's internal sounds will be played by the built-in keyboard and controllers. If you
are playing the wavestate by itself, leave this setting checked.
Off: The wavestate's keyboard and controllers, including the Mod Knobs, will be disconnected from the internal
sounds. MIDI transmit and receive will continue to work normally. Use this setting if loop-back from an external
sequencer causes duplicate notes.
Clock
[Internal, External, Auto]
Internal: The wavestate will use the Performance's Tempo setting (also shown and controlled by the
button). Use this when playing the wavestate by itself, or when you want the wavestate to control the tempo of external
MIDI devices such as a sequencer or drum machine.
External: The wavestate tempo will synchronize to incoming MIDI Clock messages from either 5-pin MIDI or USB. If
MIDI clocks are not being received, tempo-related features will not function.
Auto: This combines the functionality of Internal and External, so that you don't have to manually switch between the
two:
•
If MIDI Clocks are not being received, the wavestate uses its internal tempo.
•
If MIDI Clocks are being received, they control the tempo. If the clocks stop for more than 500 ms, the wavestate
switches back to internal tempo.
Controllers
Velocity Curve
[1 (Heavy), 2, 3, 4 (Normal), 5, 6, 7, 8 (Light), 9 (Wide)]
This controls how the volume and/or tone responds to variations in keyboard playing dynamics (velocity). Choose the
curve that is most appropriate for your playing strength and style.
Velocity Curves always work the same way between the built-in keyboard and the synth engine. The way that they
relate to MIDI, however, is tied to the Convert Position setting (see below).
76
TAP TEMPO
Advertisement
Table of Contents
