Pitch - Korg wavestate Owner's Manual

Pitch

Pitch
Octave (SHIFT-RESONANCE)
[–2, –1, 0, +1, +2]
This sets the basic pitch, in octaves. The default is 0.
Transpose
[–12...+12]
This adjusts the pitch in semitones, over a range of ±1 octave. This also affects the index into the Multisample map,
potentially changing the sample selection, similar to transposing the entire keyboard.
Tune (SHIFT-ENV INTENSITY)
[–12.00...+12.00]
This adjusts the pitch in semitones, over a range of ±1 octave.
Slope
[–1.0...+2.0]
This controls how pitch tracks the keyboard. Normally, it should be
set to the default of +1.0.
Positive (+) values cause the pitch to rise as you play higher on the
keyboard, and negative (–) values cause the pitch to fall as you play
higher on the keyboard.
When Slope is 0, playing different notes on the keyboard won't
change the pitch at all; it will be as if you're always playing C4.
Portamento
[Off, On]
Portamento lets the pitch glide smoothly between notes, instead of changing abruptly.
On: Turns on Portamento, so that pitch glides smoothly between notes.
Off: Turns off Portamento. This is the default.
Fingered
[Off, On]
Fingered applies only when Portamento is On.
On: Playing legato will turn on Portamento, and playing detached will turn it off again.
Pitch
2oct
43
+2
Pitch
+1
1oct
1oct
–1
Note on Keyboard
C4 C5
Slope
0