Setting Up Features - Avaya Interactive Response Installation Manual

2. In the browser address field, enter http://domain where domain is the domain name
of the Avaya IR system.
The domain name is specified when the system is installed and set up for the first time.
If you are running the browser locally, you can use http://127.0.0.1 in the address field.
The system displays the Web Administration entry screen.
3. Select Web Administration.
The browser displays the Login screen.
4. Log in to the system using an account with root or administration privileges.
The system displays the Web Administration screen, the entry point for the Web
Administration interface.

Setting up features

Once packages have been installed, Avaya IR features must be configured to provide the
required functionality. Use the Web Administration interface or the command-line interface to
administer features on the Avaya IR system.
The initial features to set up include:
•
Switch interfaces (such as T1/E1 or Voice over IP)
•
JDBC interface for database access
•
Call Data Handling (CDH) settings
•
Universal Call ID (UCID) settings
•
Backups
•
VoiceXML settings, if required
•
Speech configuration (such as PTTS, NLSR, or WholeWord), if required
•
CTI DIP settings, if required
•
ASAI settings, if required
•
Fax settings, if required
The "Administration > Administrative procedures" section of the Avaya IR System Help
provides step-by-step instructions for setting up features. To access Avaya IR System Help,
select Help in the Web Administration interface.
Setting up features
Issue 1.0 September 2003 61