Accessories
10.2 DRIVE-CLiQ coupling
10.2
DRIVE-CLiQ coupling
10.2.1
Description
The DRIVE-CLiQ coupling is used to connect 2 DRIVE-CLiQ cables in accordance with
degree of protection IP67 acc. to IEC 60529.
In addition to the data lines, the power supply contacts of DRIVE-CLiQ are also routed via
the coupling.
You can find information on the permissible cable length in Chapter DRIVE-CLiQ signal
cables (Page 377)
NOTICE
Damage through use of incorrect DRIVE-CLiQ cables
Damage or malfunctions can occur on the devices or system when incorrect or unreleased
DRIVE-CLiQ cables are used.
• Only use suitable DRIVE-CLiQ cables that have been released by Siemens for the
10.2.2
Interface description
10.2.2.1
Overview
①
②
Figure 10-10 Interface overview, DRIVE-CLiQ coupling
356
respective application.
Rating plate
Protective cap, Yamaichi, Article No.: Y-ConAS-24-S
Manual, 06/2019, 6SL3097-5AL00-0BP1
AC Drive