Mounting The Shield Connection Plate - Siemens SINAMICS S120 Equipment Manual

Table 5- 22 PM240-2 Power Modules Push Through, dimensions and tightening torques for mounting
Frame size Height, width, depth
Without shield
connection plate
FSA mm 238 x 126 x 171
inch 9.37 x 4.96 x 6.73
FSB mm 345 x 154 x 171
inch 13.58 x 6.06 x 6.73
FSC mm 411 x 200 x 171
inch 16.18 x 7.87 x 6.73
FSD mm 517 x 275 x 237
inch 20.35 x 10.83 x 9.33
FSE mm 615 x 354 x 237
inch 24.21 x 13.94 x 9.33
FSF mm 754 x 384 x 358
inch 29.69 x 15.12 x 14.09
5.2.6.2

Mounting the shield connection plate

The shield connection plate is used to connect the shields of the two power cables.
Tools required:
● Torx screwdriver T20
Modules, FSA to FSC
Figure 5-22
AC Drive
Manual, 06/2019, 6SL3097-5AL00-0BP1
With shield connection
plate
322 x 126 x 171
12.68 x 4.96 x 6.73
430 x 154 x 171
16.93 x 6.06 x 6.73
500 x 200 x 171
19.69 x 7.87 x 6.73
650 x 275 x 237
25.59 x 10.83 x 9.33
722 x 354 x 237
28.43 x 13.94 x 9.33
1021 x 384 x 358
40.20 x 15.12 x 14.09
Mounting a shield connection plate onto a PM240-2 Power Module, FSA to FSC
5.2 Blocksize Power Modules (PM240-2)
Fastening
6 x M5 bolts
6 x M5 nuts
6 x M5 washers
8 x M5 bolts
8 x M5 nuts
8 x M5 washers
8 x M5 bolts
8 x M5 nuts
8 x M5 washers
10 x M5 bolts
10 x M5 nuts
10 x M5 washers
10 x M5 bolts
10 x M5 nuts
10 x M5 washers
12 x M6 bolts
12 x M6 nuts
12 x M6 washers
Power Modules
Tightening torque
3.5 Nm (31.0 lbf in)
with
washers
3.5 Nm (31.0 lbf in)
with
washers
3.5 Nm (31.0 lbf in)
with
washers
3.5 Nm (31.0 lbf in)
with washers used
3.5 Nm (31.0 lbf in)
with washers used
5.9 Nm (52.2 lbf in)
with washers used
111