Installing The Battery Enclosure - Panasonic EverVolt Mini EVAC-105-2 Installation Manual

Installing the Battery Enclosure

2. INSTALLING THE BATTERY ENCLOSURE
Before installing the battery enclosures, make sure nothing inside the
package is damaged. You should have received the following items in
the package: The EverVolt inverter, backplate, brackets, screws and this
installation manual.
The following considerations must be taken into account before selecting
where to install.
• The unit cannot be mounted on flammable construction materials.
• The unit must be mounted to a solid surface.
• ALLOW 20CM (8 INCHES) OF CLEARANCE TO THE SIDES AND 50CM
(20 INCHES) TO THE TOP AND BOTTOM of the unit for proper air
circulation to dissipate heat.
• The ambient temperature (charging) must be between 41°F and
122°F and discharging 14°F and 122°F. Relative humidity must be
between 5% and 85% to ensure optimal operation. Do not operate
where the temperature and humidity are beyond the specified limits.
• The unit has a Pollution Degree rating of PD2. The unit must be
mounted in a protected area that is dry, free of excessive dust and has
adequate air flow.
• The unit was designed with an IP20 protection rating and is for indoor
applications only.
To begin installing the battery enclosures, please follow the steps below:
1. Take the enclosure out of the box and move to a stable surface.
Installation Manual 17