Table of Contents
Advertisement
Mounting The Inverter
3. Hang the inverter onto the backplate.
4. Secure the brackets to the wall using at least two screws; one on each
side of the inverter.
Dead-Front Cover
•
The dead-front cover must be removed when making or modifying
connections in the distribution box, and reinstalled when connections
have been completed.
•
To remove the dead-front cover, use the following steps.
•
Reverse the steps to reinstall the dead-front cover.
1. Remove the screws from the dead-front cover.
2. Pull off the dead-front cover.
28
Installation Manual
Hide quick links:
Advertisement
Table of Contents
