Installing The Powerhub - Panasonic EverVolt Mini EVAC-105-2 Installation Manual

Installing the PowerHub

8. INSTALLING THE POWERHUB
1. Begin by locating the PowerHub box that was shipped with the system.
2. Locate the DIN rail and two bolts within the box.
3. Mount the DIN rail on an open wall space within close proximity from
the inverter.
Note* For ease of installation, install 15A / 120V outlet next to PowerHub
if one isn't within 4 ft away.
4. Mount the PowerHub on the DIN rail until there is an audible click.
5. Plug the power supply cable (120 VAC to 5 VDC), ethernet cable (RS485)
and communications cable into the PowerHub.
44 Installation Manual