Table of Contents
Advertisement
Important Safety Warnings
CAUTION. Under high temperature environment, the cover
of this inverter could be hot enough to cause skin burns if
accidentally touched. Ensure that this inverter is away from
normal traffic areas.
WARNING. These servicing instructions are for use by
qualified personnel only. To reduce the risk of electric shock,
do not perform any servicing other than that specified in the
operating instructions unless you are qualified to do so.
WARNING. Authorized service personnel should reduce the
risk of electrical shock by disconnecting AC, DC and battery
power from the inverter before attempting any maintenance
or cleaning or working on any circuits connected to the
inverter. Turning off controls will not reduce this risk.
Internal capacitors can remain charged for five (5) minutes
after disconnecting all sources of power.
WARNING. Do not disassemble this inverter yourself. It
contains no user-serviceable parts. Attempting to service this
inverter yourself may cause a risk of electrical shock or fire
and will void the warranty from the manufacturer.
WARNING. To avoid a risk of fire and electric shock, make
sure that existing wiring is in good condition and that the wire
is not undersized. Do not operate the Inverter with damaged
or substandard wiring.
WARNING. During the installation process, drilling, punching,
and screwing the bolts can cause metal burrs, which must be
cleaned up to prevent them from falling into the electronics.
WARNING. Use only recommended accessories.
WARNING. Exposed hazardous voltage, during servicing or
for emergency procedures use a lockable manual breaker
lockout on the main service panel disconnects to enable
Lock-Out-Tag-Out per the Standard for Electrical Safety in
the Workplace, NFPA 70E, and the Standard for Workplace
Electrical Safety, CSA Z462, and any other local codes and
standards relevant to your jurisdiction.
Installation Manual
5
Hide quick links:
Advertisement
Table of Contents
