Connecting The Internet-Over-Power (Plc) - Panasonic EverVolt Mini EVAC-105-2 Installation Manual

Connecting & Disconnecting the PowerHub

9. CONNECTING THE INTERNET-OVER-POWER (PLC)

1. Unbox the Powerline Connector (PLC).
2. Plug the first PLC into an outlet near the installed EverVolt.
3. Run a CAT5/6 cable from the PowerHub to the PLC.
4. Place the second PLC next to the customer's router.
5. Run a CAT5/6 from the PLC to the customer's router.
6. For full installation instructions, refer to 'Quick Start' booklet located
in the PLC box.
Installation Manual 47