Installing the PowerHub
6. Plug the RS-485 cable into any of the 4 USB outlets on the PowerHub,
and plug the other end into the RS-485S input in the inverter.
7. Plug a working RJ-45 Ethernet cable into the PowerHub Ethernet
connector to give the PowerHub Internet access. See section "Internet
Connectivity Options" for more information on connecting the PowerHub
to the Internet.
Connecting the PowerHub to the Internet
All EverVolt systems ship with a PLC communications kit for simple
installation. EverVolt also works with a CAT5/6 hardwired cable to the
customer's internet router.
Installation Manual
45