Opening The Control Unit; Operation; Programming Unit - Viessmann Vitotronic 200 Operating Instructions Manual

Opening the control unit

The heat pump control unit may look different depend-
ing on the type of heat pump.
Control unit at the front of the heat pump
Fig. 1
Control unit at the top of the heat pump
Fig. 2
Top part of control unit with programming unit
A
Pushbutton for changing the angle
B

Programming unit

You can change all heat pump control unit settings
centrally at the programming unit.
If remote controls are installed in your rooms, you can
also adjust the settings at these remote controls.
Remote control operating instructions
21°C
14°C
BA
Control unit as a separate enclosure on the wall
Fig. 3
Note
For air/water heat pumps installed outside the build-
■
ing.
■ Brief operating instructions can be found on the back
of the flap. To open, pull the top edge of the flap for-
ward.

Operation

15