Furuno 1824C-BB Installation Manual page 55

40. Choose item and press the C: EDIT soft key. Choose appropriate setting and then press
the ENTER soft key. Refer to the table and sentence description on the next page for
details.
41. Press the A: NEXT soft key, and the NMEA PORT menu appears. Set up this port
similar to how you set up the GPS/PORT menu.
OUTPUT FORMAT
BAUD RATE
LAT/LON FORMAT
OUTPUT DESTINATION NO
Installation wizard, NMEA port setup
Item
FURUNO GPS Selects whether the GPS Receiver
Sensor GP-310B/320B is connected to the
DATA1 or DATA2 port or not.
Output Format Selects NMEA output version for the
equipment connected.
Baud Rate Sets baud rate.
Lat/Lon Format Selects latitude/longitude format to
output.
Output Destination Selects whether to output route (data
sentence RTE) and waypoint data
(data sentence WPL) when
destination is set.
PORT MNITR Use this key to view which sentences are being output. See the example below.
(soft key)
$GPGLL,3415.2345,N,13520.5301,E,152500.00
,A*E7<CR><LF>$GPGLL,3415.2345,N,135
20.5301,E,152500.00,A*E7<CR><LF>$GPGLL
,3415.2345,N,13520.5301,E,152500.00,A*
E7<CR><LF>$GPGLL,3415.2345,N,13520.530
1,E,152500.00,A*E7<CR><LF>$GPGLL,3415.
2345,N,13520.5301,E,152500.00,A*E7<CR>
<LF>$GPGLL,3415.2345,N,13520.5301,E,15
2500.00,A*E7<CR><LF
Installation wizard, port monitor display
NMEA0183
Ver 2.0
4800bps
DD'MM.MMM'
Description of items in "port" menus
Description Settings
Yes, No
NMEA0183 Ver. 1.5,
NMEA0183 Ver. 2.0
(PC) 4800, 9600,
19200/(NMEA) Auto,
4800, 38400
DD°MM.MM',
DD°MM.MMM',
DD°MM.MMMM'
Yes, No
3-11
Default Setting
Yes (DATA1)
No (DATA2)
NMEA0183 Ver. 2.0
4800 bps
DD°MM.MMM'
No