Furuno 1824C-BB Installation Manual page 46

CAUTION: Ensure that the settings to be loaded are compatible with this NavNet unit.
Improper setting will damage the equipment.
7. The screen for set up of units of measurement appears.
RANGE UNIT
DEPTH UNIT
TEMPERATURE UNIT
WIND UNIT
LOCAL TIME OFFSET
Installation wizard, units of measurement
8. Choose an item and then press the C: EDIT soft key. One of the following windows
appears.
RANGE/SPEED UNIT
nm, kt
km, km/h
sm, mph
nm & yd, kt
nm & m, kt
km & m, km/h
sm & yd, mph
WIND SPEED UNIT
kt
km/h
MPH
m/s
9. Choose unit of measurement desired and then press the C: ENTER soft key. LOCAL
TIME OFFSET allows you to use local time (instead of UTC time). Set the time
difference between local time and UTC time.
10. After you have chosen units of measurement, press the A: NEXT soft key, and the
NETWORK SETUP menu appears.
DEVICE NUMBER
(HOST NAME
(IP ADDRESS
RADAR SOURCE
SOUNDER SOURCE
AUX SOURCE
Installation wizard, network setup
nm, kt
ft
°F
kt
+00:00
DEPTH UNIT
m
ft
fa
PB
LOCAL TIME OFFSET
+ 0 0 : 0 0
1
NAVNET-1)
172.031.003.003)
1
ETRO
AUX1
3-2
TEMPERATURE UNIT
°
C
°
F