Furuno 1824C-BB Installation Manual page 51

33. The next step is to choose navigation data sources and calibrate navigation data. Press
the A: NEXT soft key to show the NAV SETUP menu.
POSITION SOURCE
SPEED SOURCE
TEMPERATURE SOURCE
DETPH SOURCE
STW CALIBRATION
TEMP CALIBRATION
DEPTH CALIBRATION
WIND AVERAGING
WIND DIRECTION OFFSET
WIND SPEED CALIBRATION +00%
STW TEMP
12.3 kt
WIND SPEED WIND DIR
1.2 kt
Installation wizard, nav setup
34. Choose item and press the C: EDIT soft key.
35. Choose appropriate setting and then press the C: ENTER soft key. Refer to the table
below for description of each item.
Item Description
Position
Chooses source of position data.
Source
Speed Chooses source of speed data
Source
Temperature Chooses source of water temperature data.
Source
Depth Source Chooses source of depth data.
STW Calibrates NMEA speed data. Enter amount
Calibration in percentage.
Temp Calibrates NMEA temperature data. Enter
Calibration offset to correct NMEA temperature data.
Depth Calibrates NMEA depth data. Enter offset to
Calibration correct NMEA depth data.
Wind Enter a value to smooth wind speed/direction
Averaging data. Ship's bow is referenced to smooth
wind vector movement.
Wind Offsets wind direction data.
Direction
Offset
Wind Speed Offsets NMEA wind speed data. Enter
Calibration amount in percentage.
GP
ETR
ETR
ETR
+00%
+00.0°F
+00ft
001 seconds(s)
S000.0°
DEPTH
56.3°F 99.5ft
131°
NAV SETUP menu description
Settings (Default in boldface)
FURUNO BB GPS: GPS Receiver
GP-310B/320B
GP: GPS navigator (via NETWORK
or NMEA port)
LC: Loran C navigator (via
NETWORK or NMEA port)
ALL: Multiple navaid connection (via
NETWORK or NMEA port)
ETR (NavNet sounder), NMEA
ETR, NMEA. Select ETR to show
water temperature data fed from the
network sounder.
ETR, NMEA. Select ETR to show
depth data fed from the network
sounder.
-50 to +50%, 00
-40.0°F to +40.0°F (or equivalent
in °F), 00.0°F
-15 to +90 ft (or equivalent in ft, fa
or P/B). 00 ft
001-600 s, 001 s
S180°-P180°, S000.0°
-50 to +50%, 00%
3-7